Ditec Medium Cut 1 Liter

DESCRIPTION
One-step sanding/high gloss polish to remove fine scratches and marks from P3000 grit in one operation. Hologram free! The unique abrasive grain contained in the fine abrasive paste grinds continuously during processing so finely that, despite the high grinding performance, in only one polishing step, a perfect paint surface is achieved. Silicone and solvent-free. Ditec Medium Cut is fully suitable for all commercially available paint systems, including scratch-resistant paints.

PROCEDURE
For processing we recommend the orange polishing pad or microfiber/woolpad. Apply sufficient amount of Ditec Medium Cut to the polishing pad or paint surface, spread at low speed (approx. 1.000 rpm) on the defect and apply approx. 1.800 rpm. and moderate pressure.

For Safety Data Sheet, follow the link below:

Sikkerhedsdatablad - Ditec Medium Cut - DK

Safety data sheet - Ditec Medium Cut - ENG

Ficha de datos de seguridad - Ditec Medium Cut - ESP

Sikkerhetsdatablad - Ditec Medium Cut - NO

Säkerhetsdatablad - Ditec Medium Cut - SE

Malzeme Güvenlik Bilgi Formu - Ditec Medium Cut - TR